Difference between revisions of "Boot image"
(I annotated some more of the boot image.)
|Line 73:||Line 73:|
nop /* do I care about this ??? */
nop /* do I care about this ??? */
This jumps past the [[wikipedia:BIOS Parameter
This jumps past the [[wikipedia:BIOS Parameter |BIOS Parameter Block]] that takes up the first portion of the sector.
Revision as of 10:56, 18 November 2010
Grub starts execution with the boot image. The boot image is 512 bytes and can be found in file form at
/boot/grub/boot.img. The boot image is 512 bytes because that is how big the master boot record is. On a BIOS-based computer, a disk is booted by reading the first 512 bytes of a disk into memory address 0x7c00 and jumping to that location to begin execution. On an x86 or x86-64 system, the source code for that boot image can be found in the grub source code in assembly as
grub-core/boot/i386/pc/boot.S. The bootloader is written in 16-bit assembly so it may help to be familiar with the 16-bit instruction set as well as the register set used. It's also useful to know how interrupts work since they get enabled and disabled at various times. Intel makes their manuals specifying these details available at http://www.intel.com/products/processor/manuals.
/* -*-Asm-*- */
This is just a magic comment that tells certain text editors to treat this as assembly and edit in an appropriate mode.
/* * GRUB -- GRand Unified Bootloader * Copyright (C) 1999,2000,2001,2002,2005,2006,2007,2008,2009 Free Software Foundation, Inc. * * GRUB is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * GRUB is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with GRUB. If not, see <http://www.gnu.org/licenses/>. */
This is just the license for the code.
#include <grub/symbol.h> #include <grub/boot.h> #include <grub/machine/boot.h>
These includes include information about offsets and other symbols used in the assembly.
/* * defines for the code go here */ /* Print message string */ #define MSG(x) movw $x, %si; call LOCAL(message) #define ERR(x) movw $x, %si; jmp LOCAL(error_message)
These are just some definitions for how to print messages.
This tells the assembler that we are starting the
boot.S logical file.
This tells the assembler that the text portion of the executable format starts here.
/* Tell GAS to generate 16-bit instructions so that this code works in real mode. */ .code16
This tells the assembler to output 16-bit instructions. This seems to only apply to ARM though according to the documentation.
.globl _start, start; _start: start: /* * _start is loaded at 0x7c00 and is jumped to with CS:IP 0:0x7c00 */ /* * Beginning of the sector is compatible with the FAT/HPFS BIOS * parameter block. */ jmp LOCAL(after_BPB) nop /* do I care about this ??? */
This jumps past the BIOS Parameter Block that takes up the first portion of the sector.
/* * This space is for the BIOS parameter block!!!! Don't change * the first jump, nor start the code anywhere but right after * this area. */ . = _start + GRUB_BOOT_MACHINE_BPB_START . = _start + 4 /* scratch space */ mode: .byte 0 disk_address_packet: sectors: .long 0 heads: .long 0 cylinders: .word 0 sector_start: .byte 0 head_start: .byte 0 cylinder_start: .word 0 /* more space... */ . = _start + GRUB_BOOT_MACHINE_BPB_END /* * End of BIOS parameter block. */
This reserves space for the BIOS parameter block.
kernel_address: .word GRUB_BOOT_MACHINE_KERNEL_ADDR . = _start + GRUB_BOOT_MACHINE_KERNEL_SECTOR kernel_sector: .long 1, 0 . = _start + GRUB_BOOT_MACHINE_BOOT_DRIVE boot_drive: .byte 0xff /* the disk to load kernel from */ /* 0xff means use the boot drive */
Some other magic values are set up.
LOCAL(after_BPB): /* general setup */ cli /* we're not safe here! */
This is the first instruction after the jump. The
cli instruction clears the interrupts flag so that the processor does not respond to external maskable interrupts.
/* * This is a workaround for buggy BIOSes which don't pass boot * drive correctly. If GRUB is installed into a HDD, check if * DL is masked correctly. If not, assume that the BIOS passed * a bogus value and set DL to 0x80, since this is the only * possible boot drive. If GRUB is installed into a floppy, * this does nothing (only jump). */ . = _start + GRUB_BOOT_MACHINE_DRIVE_CHECK boot_drive_check: jmp 3f /* grub-setup may overwrite this jump */ testb $0x80, %dl jz 2f 3: /* Ignore %dl different from 0-0x0f and 0x80-0x8f. */ testb $0x70, %dl jz 1f 2: movb $0x80, %dl 1: /* * ljmp to the next instruction because some bogus BIOSes * jump to 07C0:0000 instead of 0000:7C00. */ ljmp $0, $real_start
Part of the BIOS interface is indicating which disk is being booted from. Some BIOSes get this wrong so this uses some heuristics to make a fallback guess if the BIOS did something dumb.
real_start: /* set up %ds and %ss as offset from 0 */ xorw %ax, %ax movw %ax, %ds movw %ax, %ss /* set up the REAL stack */ movw $GRUB_BOOT_MACHINE_STACK_SEG, %sp sti /* we're safe again */ /* * Check if we have a forced disk reference here */ movb boot_drive, %al cmpb $0xff, %al je 1f movb %al, %dl 1: /* save drive reference first thing! */ pushw %dx /* print a notification message on the screen */ MSG(notification_string) /* set %si to the disk address packet */ movw $disk_address_packet, %si /* check if LBA is supported */ movb $0x41, %ah movw $0x55aa, %bx int $0x13 /* * %dl may have been clobbered by INT 13, AH=41H. * This happens, for example, with AST BIOS 1.04. */ popw %dx pushw %dx /* use CHS if fails */ jc LOCAL(chs_mode) cmpw $0xaa55, %bx jne LOCAL(chs_mode) andw $1, %cx jz LOCAL(chs_mode)
Grub tries to use LBA geometry, but if the BIOS does not support LBA, it falls back to using CHS geometry.
lba_mode: xorw %ax, %ax movw %ax, 4(%si) incw %ax /* set the mode to non-zero */ movb %al, -1(%si) /* the blocks */ movw %ax, 2(%si) /* the size and the reserved byte */ movw $0x0010, (%si) /* the absolute address */ movl kernel_sector, %ebx movl %ebx, 8(%si) movl kernel_sector + 4, %ebx movl %ebx, 12(%si) /* the segment of buffer address */ movw $GRUB_BOOT_MACHINE_BUFFER_SEG, 6(%si) /* * BIOS call "INT 0x13 Function 0x42" to read sectors from disk into memory * Call with %ah = 0x42 * %dl = drive number * %ds:%si = segment:offset of disk address packet * Return: * %al = 0x0 on success; err code on failure */ movb $0x42, %ah int $0x13 /* LBA read is not supported, so fallback to CHS. */ jc LOCAL(chs_mode) movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx jmp LOCAL(copy_buffer) LOCAL(chs_mode): /* * Determine the hard disk geometry from the BIOS! * We do this first, so that LS-120 IDE floppies work correctly. */ movb $8, %ah int $0x13 jnc LOCAL(final_init) /* * The call failed, so maybe use the floppy probe instead. */ testb $GRUB_BOOT_MACHINE_BIOS_HD_FLAG, %dl jz LOCAL(floppy_probe) /* Nope, we definitely have a hard disk, and we're screwed. */ ERR(hd_probe_error_string) LOCAL(final_init): /* set the mode to zero */ movzbl %dh, %eax movb %ah, -1(%si) /* save number of heads */ incw %ax movl %eax, 4(%si) movzbw %cl, %dx shlw $2, %dx movb %ch, %al movb %dh, %ah /* save number of cylinders */ incw %ax movw %ax, 8(%si) movzbw %dl, %ax shrb $2, %al /* save number of sectors */ movl %eax, (%si) setup_sectors: /* load logical sector start (top half) */ movl kernel_sector + 4, %eax orl %eax, %eax jnz LOCAL(geometry_error) /* load logical sector start (bottom half) */ movl kernel_sector, %eax /* zero %edx */ xorl %edx, %edx /* divide by number of sectors */ divl (%si) /* save sector start */ movb %dl, %cl xorw %dx, %dx /* zero %edx */ divl 4(%si) /* divide by number of heads */ /* do we need too many cylinders? */ cmpw 8(%si), %ax jge LOCAL(geometry_error) /* normalize sector start (1-based) */ incb %cl /* low bits of cylinder start */ movb %al, %ch /* high bits of cylinder start */ xorb %al, %al shrw $2, %ax orb %al, %cl /* save head start */ movb %dl, %al /* restore %dl */ popw %dx /* head start */ movb %al, %dh /* * BIOS call "INT 0x13 Function 0x2" to read sectors from disk into memory * Call with %ah = 0x2 * %al = number of sectors * %ch = cylinder * %cl = sector (bits 6-7 are high bits of "cylinder") * %dh = head * %dl = drive (0x80 for hard disk, 0x0 for floppy disk) * %es:%bx = segment:offset of buffer * Return: * %al = 0x0 on success; err code on failure */ movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx movw %bx, %es /* load %es segment with disk buffer */ xorw %bx, %bx /* %bx = 0, put it at 0 in the segment */ movw $0x0201, %ax /* function 2 */ int $0x13 jc LOCAL(read_error) movw %es, %bx LOCAL(copy_buffer): /* * We need to save %cx and %si because the startup code in * kernel uses them without initializing them. */ pusha pushw %ds movw $0x100, %cx movw %bx, %ds xorw %si, %si movw $GRUB_BOOT_MACHINE_KERNEL_ADDR, %di movw %si, %es cld rep movsw popw %ds popa /* boot kernel */ jmp *(kernel_address) /* END OF MAIN LOOP */
/* * BIOS Geometry translation error (past the end of the disk geometry!). */ LOCAL(geometry_error): ERR(geometry_error_string) </syntaxhighlight lang="asm"> This is where Grub prints the error message when there is an issue with the disk geometry. <syntaxhighlight lang="asm"> /* * Read error on the disk. */ LOCAL(read_error): movw $read_error_string, %si LOCAL(error_message): call LOCAL(message) LOCAL(general_error): MSG(general_error_string) /* go here when you need to stop the machine hard after an error condition */ /* tell the BIOS a boot failure, which may result in no effect */ int $0x18 LOCAL(stop): jmp LOCAL(stop)
notification_string: .asciz "GRUB " geometry_error_string: .asciz "Geom" hd_probe_error_string: .asciz "Hard Disk" read_error_string: .asciz "Read" general_error_string: .asciz " Error\r\n"
Several null-terminated ASCII strings are set up.
/* * message: write the string pointed to by %si * * WARNING: trashes %si, %ax, and %bx */ /* * Use BIOS "int 10H Function 0Eh" to write character in teletype mode * %ah = 0xe %al = character * %bh = page %bl = foreground color (graphics modes) */ 1: movw $0x0001, %bx movb $0xe, %ah int $0x10 /* display a byte */ LOCAL(message): lodsb cmpb $0, %al jne 1b /* if not end of string, jmp to display */ ret /* * Windows NT breaks compatibility by embedding a magic * number here. */ . = _start + GRUB_BOOT_MACHINE_WINDOWS_NT_MAGIC nt_magic: .long 0 .word 0 /* * This is where an MBR would go if on a hard disk. The code * here isn't even referenced unless we're on a floppy. Kinda * sneaky, huh? */ . = _start + GRUB_BOOT_MACHINE_PART_START part_start: probe_values: .byte 36, 18, 15, 9, 0 LOCAL(floppy_probe): /* * Perform floppy probe. */ movw $probe_values - 1, %si LOCAL(probe_loop): /* reset floppy controller INT 13h AH=0 */ xorw %ax, %ax int $0x13 incw %si movb (%si), %cl /* if number of sectors is 0, display error and die */ cmpb $0, %cl jne 1f /* * Floppy disk probe failure. */ MSG(fd_probe_error_string) jmp LOCAL(general_error) /* "Floppy" */ fd_probe_error_string: .asciz "Floppy" 1: /* perform read */ movw $GRUB_BOOT_MACHINE_BUFFER_SEG, %bx movw $0x201, %ax movb $0, %ch movb $0, %dh int $0x13 /* if error, jump to "LOCAL(probe_loop)" */ jc LOCAL(probe_loop) /* %cl is already the correct value! */ movb $1, %dh movb $79, %ch jmp LOCAL(final_init) . = _start + GRUB_BOOT_MACHINE_PART_END
/* the last 2 bytes in the sector 0 contain the signature */ .word GRUB_BOOT_MACHINE_SIGNATURE
The MBR has some magic bytes that let the BIOS recognize it instead of being random data.