Thinkpad R500

Revision as of 23:12, 21 August 2013 by Defer (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Hardware

Everything works except the fingerprint reader.

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)

make.conf

/etc/portage/make.conf

CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
CHOST="x86_64-pc-linux-gnu"
MAKEOPTS="-j2"
INPUT_DEVICES="evdev synaptics"
VIDEO_CARDS="intel"

Network

Configure drivers for ethernet and wlan cards.

Device Drivers  --->
[*] Network device support  --->
[*]   Ethernet driver support  --->
[*]   Broadcom devices
<M>     Broadcom Tigon3 support

[*]   Wireless LAN  --->
<M>   Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi)
-M-     Intel Wireless WiFi

Install firmware for wlan card.

# emerge linux-firmware

Sensors

Configure drivers for sensors.

Device Drivers  --->
-*- I2C support  --->
I2C Hardware Bus support  --->
<*> Intel 82801 (ICH/PCH)

-*- Hardware Monitoring support  --->
<M>   Intel Core/Core2/Atom temperature sensor

[*] X86 Platform Specific Device Drivers  --->
<M>   ThinkPad ACPI Laptop Extras
[*]     Console audio control ALSA interface

Install sensor monitoring program.

# emerge lm_sensors

Watchdog

Device Drivers  --->
[*] Watchdog Timer Support  --->
<M>   Intel TCO Timer/Watchdog
[*]     Intel TCO Timer/Watchdog Specific Vendor Support

Random number generator

Device Drivers  --->
Character devices  --->
[*]   Intel HW Random Number Generator support

Memorycard reader

Bus options (PCI etc.)  --->
[*] PCCard (PCMCIA/CardBus) support  --->
[*]   CardBus yenta-compatible bridge support

Device Drivers  --->
[*] Memory Technology Device (MTD) support  --->
[*]   NAND SSFDC (SmartMedia) read only translation layer
[*]   NAND Device Support  --->
[*]   Ricoh xD card reader

[*] MMC/SD/SDIO card support  --->
[*]   Secure Digital Host Controller Interface support
[*]   SDHCI support on PCI bus

[*] Sony MemoryStick card support  ---> 
[*]   Ricoh R5C592 MemoryStick interface support

Webcam

Device Drivers  --->
[*] Multimedia support  --->
[*]   Cameras/video grabbers support
[*]   Media USB Adapters  --->
[*]   USB Video Class (UVC)

Trackpoint

Enable 3-button scroll. /usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf

Section "InputClass"
        Identifier      "Trackpoint Wheel Emulation"
        MatchProduct    "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device"
        MatchDevicePath "/dev/input/event*"
        Option  "EmulateWheel"          "true"
        Option  "EmulateWheelButton"    "2"
        Option  "Emulate3Buttons"       "false"
        Option  "XAxisMapping"          "6 7"
        Option  "YAxisMapping"          "4 5"
EndSection

Power saving

Disable bluetooth on startup. /etc/local.d/powersave.start

echo "disable" > /proc/acpi/ibm/bluetooth

The following config enables aggressive power saving. /etc/udev/rules.d/10-local-powersave.rules

# PCI runtime power management
ACTION=="add", SUBSYSTEM=="pci", ATTR{power/control}="auto"

# USB autosuspend
ACTION=="add", SUBSYSTEM=="usb", ATTR{power/control}="auto"
ACTION=="add", SUBSYSTEM=="usb", TEST=="power/autosuspend" ATTR{power/autosuspend}="60"

# SATA active link power management
SUBSYSTEM=="scsi_host", KERNEL=="host*", ATTR{link_power_management_policy}="min_power"

# Wlan power save
ACTION=="add", SUBSYSTEM=="net", KERNEL=="wlan*" RUN+="/usr/sbin/iw dev %k set power_save on"

# Disable bluetooth
SUBSYSTEM=="rfkill", ATTR{type}=="bluetooth", ATTR{state}="0"

# Disable wake-on-LAN
ACTION=="add", SUBSYSTEM=="net", KERNEL=="eth*" RUN+="/usr/sbin/ethtool -s %k wol d"