Difference between pages "Install/ru/Partitioning" and "Hostname"

From Funtoo
< Install‎ | ru(Difference between pages)
Jump to navigation Jump to search
 
 
Line 1: Line 1:
<noinclude>
w.i.p
{{InstallPart|процесс разбиения диска и создания файловых систем}}
==Introduction==
</noinclude>
A hostname is a unique name created to identify a machine on a network. In computer networking, a hostname is a label that is assigned to a device connected to a computer network and that is used to identify the device in various forms of electronic communication such as the World Wide Web, e-mail or Usenet. Hostnames may be simple names consisting of a single word or phrase, or they may be structured.
=== Подготовка жесткого диска ===
==Configuration==
 
In Funtoo Linux <code>/etc/conf.d/hostname</code> is the only configuration file for setting a hostname. In OpenRC framework <code>/etc/conf.d/foo</code> is the configuration file for a corresponding Init script <code>/etc/init.d/foo</code>.  With the case of hostname, default value in <code>/etc/conf.d/hostname</code> is set to ''localhost'', means when system boots and OpenRC's <code>/etc/init.d/hostname</code> script started a hostname getting only ''localhost'' nameHow it looks? In your shell promt this will look in following way, an example for root:
В этой части  мы научимся различным способам установки Funtoo Linux -- и загрузки с -- жесткого диска.
 
==== Введение ====
 
В прежние времена существовал лишь один способ загрузить PC-совместимый компьютер. Все наши дектопы и сервера имели стандартный PC BIOS, все наши харды использовали MBR и были разбиты используя схему разбивки MBR. Вот как это все было и нам это нравилось!
 
Затем появились EFI и UEFI,  встроенные программы нового образца наряду со схемой разбивки GPT, поддерживающая диски размером более 2.2TБ. Неожиданно, нам стали доступны различные способы установки и загрузки Линукс систем . То, что было единым методом, стало чем-то более сложным.
 
Воспользуемся моментом и рассмотрим доступные способы конфигурации жесткого диска для загрузки Funtoo Linux. Данное Руководство рекомендует способ "по-старинке" , загрузка BIOS и использование MBR.  Данный способ работает (за исключением редких случаев) и всесторонне поддерживается. И в этом нет ничего плохого. Если Ваш жесткий диск 2TБ или меньшего размера это не является препятствием для использования всего дискового пространства.
 
Но, бывают ситуации когда метод "по-старинке"  не является оптимальным. Если Ваш жесткий диск размером более 2TБ , MBR разбивка не сможет обеспечить доступ ко всему дисковому пространству.  Это одна из причин.  Вторая причина: существуют  "PC" системы, которые более не поддерживают  BIOS загрузку  и  форсируют UEFI загрузку. Из чувства сострадания к тем, кто попал в затруднение перед выбором, это Руководство также описывает установку и загрузку UEFI систем.
 
Мы всё же рекомендуем разбивку "по-старинке". Загрузчик, который мы используем для загрузки Линукс в этом руководстве называется GRUB,  таки образом мы называем метод  как '''BIOS + GRUB (MBR)''' . Это традиционный способ установки на PC-совместимые компьютеры.
 
Если Вам необходимо использование UEFI для загрузки, мы советуем не использовать MBR вообще, ввиду того, что некоторые системы поддерживают MBR,  а некоторые нет. Вместо, мы советуем использование UEFI  для загрузки GRUB, который, затем в свою очередь загрузит Линукс. Мы называем этот  метод как '''UEFI + GRUB (GPT)'''.
 
И да, есть еще несколько способов, некоторые из них задокументированы в [[Boot Methods]] . Обычно мы рекомендуем  '''BIOS + GRUB (GPT)''' метод, но он ограничивается не столь широкой поддержкой со стороны комплектующих.
 
'''Вопрос --  какой из методов использовать?'''  Вот какой.
 
;Принцип 1 - "По-старинке":  Если Вы можете успешно загрузить System Rescue CD и видите синее меню, то Вы используете BIOS,  и скорее всего Вы можете загрузить Funtoo Linux используя BIOS. Итак,  следуйте этому способу и используйте BIOS загрузку,  кроме случаев Вам по-какой либо причине необходим UEFI, например если размер жесткого диска >2.2TБ.  В этом случае следуйте Принцип  2.
 
;Принцип 2 - "Модерн":  Если Вы можете успешно загрузить System Rescue CD и видите черно-белое меню -- поздравления,  Ваша система поддерживает UEFI загрузку. Это значит, что Вы готовы установить Funtoo Linux к загрузке с помощью UEFI.  Ваша система также может поддерживать загрузку BIOS,  но попрбуйте UEFI для начала. Вы можете "покопаться" в настройках BIOS.
 
;Какая разница между "По-старинке" и "Модерн"?:  Если Вы следуете  MBR разбивке, Ваш <code>/boot</code> раздел будет отформатирован файловой системой ext2 , и Вы будете использовать <code>fdisk</code> для создания MBR разделов. Если Вы следуете "модерн", GPT разделам и UEFI загрузке,  Ваш <code>/boot</code> раздел будет отформатирован  в файловую систему vfat,  поскольку это единственная файловая система поддерживаемая UEFI, и Вы будете использовать <code>gdisk</code> для создания GPT разделов.  И Вы установите GRUB несколько иначе.  Вот к чему сводится различие между методами.
 
;Имейте в виду: Для установки Funtoo Linux используя метод "модерн", Вы должны загрузить System Rescue CD в UEFI режиме -- и увидеть начальное черно-белое меню. В противном случае, UEFI не активно и Вы не сможете продолжить!
 
{{Note|'''Некоторые материнские платы якобы поддерживают UEFI, но на самом деле нет.''' Исследуйте . К примеру,  Award BIOS в моей Gigabyte GA-990FXA-UD7 rev 1.1 имеет возможность включить UEFI загрузку для CD/DVD. '''Этого не достаточно для обеспечения UEFI загрузки для жестких дисков и установки Funtoo Linux.''' UEFI должно поддерживать и сьемные носители (таким образом Вы сможете загрузить System Rescue CD используя  UEFI) и жесткие диски (Вы можете загрузить Funtoo Linux.) Оказывается, что более поздние ревизии этой платы (rev 3.0) имеют новую версию BIOS который полностью поддерживает UEFI.  Это приводит к третьему принципу -- знайте Ваши комплектующие.}}
 
==== Метод (BIOS/MBR) "По-старинке" ====
 
{{Note|Используйте данный метод при загрузке с помощью BIOS,  и если System Rescue CD имеет начальное меню загрузки светло-голубое.  Если Вы собираетесь использовать "модерн", [[#Метод (UEFI/GPT) "Модерн"|кликните здесь в меню UEFI/GPT.]]}}
 
===== Подготовка =====
 
Прежде чем начать , неплохо бы удостовериться, что Вы используете нужный диск для разбивки.  Попробуйте эту комманду и проверьте, что <code>/dev/sda</code> тот самый диск, который Вы желаете разбить:
 
<console>
# ##i##fdisk -l /dev/sda
 
Disk /dev/sda: 640.1 GB, 640135028736 bytes, 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
 
 
#        Start          End    Size  Type            Name
1        2048  1250263694  596.2G  Linux filesyste Linux filesystem
</console>
 
Теперь, рекомендуем стереть  существующие таблицы разделов  MBR или GPT,  которые могут помешать BIOS во время загрузки. Мы используем комманду <code>sgdisk</code>:
{{fancywarning|Это необратимый процесс, который уничтожит все разделы! Вы предупреждены! Советуем сохранить критические данние перед этим.}}
 
<console>
# ##i##sgdisk --zap-all /dev/sda
 
Creating new GPT entries.
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
</console>
 
Не стоит беспокоится об этом сообщении, так как комманда успешно выполнена:
 
<console>
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory.
***************************************************************
</console>
 
===== Разбивка диска =====
 
Теперь мы используем <code>fdisk</code> для создания таблицы разделов MBR и самих разделов:
 
<console>
# ##i##fdisk /dev/sda
</console>
 
В консоли <code>fdisk</code>, следуйте следующим шагам:
 
'''Очистить таблицу разделов''':
 
<console>
Command (m for help): ##i##o ↵
</console>
 
'''Создать раздел 1''' (boot):
 
<console>
Command (m for help): ##i##n ↵
Partition type (default p): ##i##↵
Partition number (1-4, default 1): ##i##↵
First sector: ##i##↵
Last sector: ##i##+128M ↵
</console>
 
'''Создать раздел 2''' (своп):
 
<console>
Command (m for help): ##i##n ↵
Partition type (default p): ##i##↵
Partition number (2-4, default 2): ##i##↵
First sector: ##i##↵
Last sector: ##i##+2G ↵
Command (m for help): ##i##t ↵
Partition number (1,2, default 2): ##i## ↵
Hex code (type L to list all codes): ##i##82 ↵
</console>
 
'''Создать корневой раздел:'''
 
<console>
Command (m for help): ##i##n ↵
Partition type (default p): ##i##↵
Partition number (3,4, default 3): ##i##↵
First sector: ##i##↵
Last sector: ##i##↵
</console>
 
'''Проверить таблицу разделов:'''
 
<console>
Command (m for help): ##i##p
 
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x82abc9a6
 
Device    Boot    Start      End    Blocks Id System
/dev/sda1          2048    264191    131072 83 Linux
/dev/sda2        264192  4458495  2097152  82 Linux swap / Solaris
/dev/sda3        4458496 625142447 310341976  83 Linux
</console>
 
'''Записать таблицу разделов на диск:'''
 
<console>
<console>
Command (m for help): ##i##w
localhost ~ # ##i## Hello :)
</console>
</console>
 
Let's play a bit with a configuration. Open <code>/etc/conf.d/hostname</code> with your favorite editor and set a hostname of your choiceBelow, I will use a real examples  from one of my working test boxes.
Ваша новая таблица разделов будет записана на диск.
 
{{Note|Вы завершили создание разделов! Теперь, перейдите к  [[#Создание файловых систем|Создание файловых систем]].}}
 
==== Метод (UEFI/GPT) "Модерн" ====
 
{{Note|Используйте данный метод при загрузке с помощью UEFI,  и если System Rescue CD имеет начальное меню загрузки черно-белого цвета. Если оно было светло-голубого цвета, этот метод не будет работать.}}
 
Комманда <tt>gdisk</tt> используется для создания таблицы разделов GPT Измените размеры в соответсвии Вашим требованиям, хотя приведенные ниже размеры будут работать для большинства пользователей. Запустите <code>gdisk</code>:
 
<console>
<console>
# ##i##gdisk
localhost ~ # ##i## nano /etc/conf.d/hostname
</console>
</console>
 
Let's set it to hostname="oleg-stable.host.funtoo.org". Save the file and restart a hostname service:
В консоли <tt>gdisk</tt>, следуйте следующим шагам:
 
'''Создайте новую пустую таблицу разделов''' (Это уничтожит данные при сохранении на диск):
 
<console>
<console>
Command: ##i##o ↵
localhost ~ # ##i## service hostname restart
This option deletes all partitions and creates a new protective MBR.
Proceed? (Y/N): ##i##y ↵
</console>
</console>
 
Now, let's examine our changes, after a restarting a hostname
'''Создайте раздел 1''' (загрузочный):
 
<console>
<console>
Command: ##i##n ↵
oleg-stable ~ # ##i## Hello :)
Partition Number: ##i##1 ↵
First sector: ##i##
Last sector: ##i##+500M ↵
Hex Code: ##i##↵
</console>
</console>
 
== Diving deeper==
'''Создайте раздел 2''' (своп):
Notice, that in above output we seeing a shortened hostname and not a FQDN (Fully Qualified Domain Name). Don't be frustrated. This is  how  default bash promt <code>PS1</code> set. To get nice promts, please, consult http://www.funtoo.org/Prompt_Magic
 
Another way to test our settings is using a '''hostname''' command. Here we will show only  some of it's features. Let's try to execute '''hostname''' command:
<console>
<console>
Command: ##i##n ↵
oleg-stable ~ # ##i## hostname
Partition Number: ##i##2 ↵
oleg-stable.host.funtoo.org
First sector: ##i##↵
Last sector: ##i##+4G ↵
Hex Code: ##i##8200 ↵
</console>
</console>
 
Now we see our fully qualified domain name hostname just how we configured it in <code>/etc/conf.d/hostname</code> in above paragraph. To get a short hostname we need to set '''-s ''' (short) argument to hostname command.
'''Создайте раздел 3''' (корневой):
 
<console>
<console>
Command: ##i##n ↵
oleg-stable ~ # ##i## hostname -s
Partition Number: ##i##3 ↵
oleg-stable
First sector: ##i##
Last sector: ##i##↵##!i## (for rest of disk)
Hex Code: ##i##↵
</console>
</console>
 
Good! Hostname offers more then just displaying a system host name but can also set one. Let's try:
По пути Вы можете набрать "<tt>p</tt>" и нажать Enter для просмотра текущей таблицы разделов. Если Вы допустили ошибку,  наберите "<tt>d</tt>" для удаления созданного раздела. Если Вы удовлетворены Вашей схемой разделов, наберите "<tt>w</tt>" для записи таблицы на диск:
 
'''Записать таблицу разделов на диск''':
 
<console>
<console>
Command: ##i##w ↵
oleg-stable ~ # ##i## hostname foo.bar.baz
Do you want to proceed? (Y/N): ##i##Y ↵
oleg-stable ~ # ##i## hostname
foo.bar.baz
</console>
</console>
As you can see, we changed a hostname on-the-fly. This is not recommended way.
{{fancywarning|Please, notice that using '''hostname''' command to configure will work temporary for a current session and will be reverted back to a value set in <code>/etc/conf.d/hostname</code> file with next system restart.}}


Таблица разделов будет записана на диск и <tt>gdisk</tt> завершит работу.
Now that we got a brief description of a hostname and basic configuration steps, its time to reflect another important case which is directly related to a Funtoo Linux hostname generation, a hosts.
 
Теперь  GPT/GUID разделы созданы, и будут показаны как ''блочные утройства'' в Linux:
 
* <tt>/dev/sda1</tt>, будет использоваться  для <tt>/boot</tt>, загрузочный раздел
* <tt>/dev/sda2</tt>, будет использоваться как своп , и
* <tt>/dev/sda3</tt>, корневой раздел.


==== Создание файловых систем ====
==Hosts case==
 
As per man page <code>hosts</code> stands for static table lookup for hostnames and it's configuration file is <code>/etc/hosts</code>. Here is how it looks
{{Note|Данная часть рассматривает как BIOS ''так и'' UEFI установки. Не пропускайте раздел!}}
{{file|name=/etc/hosts|body=
 
# Auto-generated hostname. Please do not remove this comment.
Before your newly-created partitions can be used, the block devices need to be initialized with filesystem ''metadata''. This process is known as ''creating a filesystem'' on the block devices. After filesystems are created on the block devices, they can be mounted and used to store files.
127.0.0.1      oleg-stable.host.funtoo.org oleg-stable localhost localhost.localdomain
 
::1             oleg-stable.host.funtoo.org oleg-stable localhost localhost.localdomain
Let's keep this simple. Are you using old-school MBR partitions? If so, let's create an ext2 filesystem on /dev/sda1:
 
<console>
# ##i##mkfs.ext2 /dev/sda1
</console>
 
If you're using new-school GPT partitions for UEFI, you'll want to create a vfat filesystem on /dev/sda1, because this is what UEFI is able to read:
 
<console>
# ##i##mkfs.vfat -F 32 /dev/sda1
</console>
 
Now, let's create a swap partition. This partition will be used as disk-based virtual memory for your Funtoo Linux system.
 
You will not create a filesystem on your swap partition, since it is not used to store files. But it is necessary to initialize it using the <code>mkswap</code> command. Then we'll run the <code>swapon</code> command to make your newly-initialized swap space immediately active within the live CD environment, in case it is needed during the rest of the install process:
 
<console>
# ##i##mkswap /dev/sda2
# ##i##swapon /dev/sda2
</console>
 
Now, we need to create a root filesystem. This is where Funtoo Linux will live. We generally recommend ext4 or XFS root filesystems. If you're not sure, choose ext4. Here's how to create a root ext4 filesystem:
 
<console>
# ##i##mkfs.ext4 /dev/sda3
</console>
 
...and here's how to create an XFS root filesystem, if you choose to use XFS:
 
<console>
# ##i##mkfs.xfs /dev/sda3
</console>
 
Your filesystems (and swap) have all now been initialized, so that that can be mounted (attached to your existing directory heirarchy) and used to store files. We are ready to begin installing Funtoo Linux on these brand-new filesystems.
 
{{fancywarning|1=
When deploying an OpenVZ host, please use ext4 exclusively. The Parallels development team tests extensively with ext4, and modern versions of <code>openvz-rhel6-stable</code> are '''not''' compatible with XFS, and you may experience kernel bugs.
}}
}}
 
As you can see it has entries from our <code>/etc/conf.d/hostname</code>. As you may have guessed, in Funtoo Linux <code>/etc/hosts</code> file entries are auto-generated, when OpenRC hostname service starts. Previously, it is used to edit <code>/etc/hosts</code> manually. In Funtoo Linux there is no such need.
==== Mounting filesystems ====
 
Mount the newly-created filesystems as follows, creating <code>/mnt/funtoo</code> as the installation mount point:
 
<console>
# ##i##mkdir /mnt/funtoo
# ##i##mount /dev/sda3 /mnt/funtoo
# ##i##mkdir /mnt/funtoo/boot
# ##i##mount /dev/sda1 /mnt/funtoo/boot
</console>
 
Optionally, if you have a separate filesystem for <code>/home</code> or anything else:
 
<console>
# ##i##mkdir /mnt/funtoo/home
# ##i##mount /dev/sda4 /mnt/funtoo/home
</console>
 
If you have <code>/tmp</code> or <code>/var/tmp</code> on a separate filesystem, be sure to change the permissions of the mount point to be globally-writeable after mounting, as follows:
 
<console>
# ##i##chmod 1777 /mnt/funtoo/tmp
</console>

Revision as of 06:37, February 23, 2015

w.i.p

Introduction

A hostname is a unique name created to identify a machine on a network. In computer networking, a hostname is a label that is assigned to a device connected to a computer network and that is used to identify the device in various forms of electronic communication such as the World Wide Web, e-mail or Usenet. Hostnames may be simple names consisting of a single word or phrase, or they may be structured.

Configuration

In Funtoo Linux /etc/conf.d/hostname is the only configuration file for setting a hostname. In OpenRC framework /etc/conf.d/foo is the configuration file for a corresponding Init script /etc/init.d/foo. With the case of hostname, default value in /etc/conf.d/hostname is set to localhost, means when system boots and OpenRC's /etc/init.d/hostname script started a hostname getting only localhost name. How it looks? In your shell promt this will look in following way, an example for root:

localhost ~ #  Hello :)

Let's play a bit with a configuration. Open /etc/conf.d/hostname with your favorite editor and set a hostname of your choice. Below, I will use a real examples from one of my working test boxes.

localhost ~ #  nano /etc/conf.d/hostname

Let's set it to hostname="oleg-stable.host.funtoo.org". Save the file and restart a hostname service:

localhost ~ #  service hostname restart

Now, let's examine our changes, after a restarting a hostname

oleg-stable ~ #  Hello :)

Diving deeper

Notice, that in above output we seeing a shortened hostname and not a FQDN (Fully Qualified Domain Name). Don't be frustrated. This is how default bash promt PS1 set. To get nice promts, please, consult http://www.funtoo.org/Prompt_Magic Another way to test our settings is using a hostname command. Here we will show only some of it's features. Let's try to execute hostname command:

oleg-stable ~ #  hostname
oleg-stable.host.funtoo.org

Now we see our fully qualified domain name hostname just how we configured it in /etc/conf.d/hostname in above paragraph. To get a short hostname we need to set -s (short) argument to hostname command.

oleg-stable ~ #  hostname -s
oleg-stable

Good! Hostname offers more then just displaying a system host name but can also set one. Let's try:

oleg-stable ~ #  hostname foo.bar.baz
oleg-stable ~ #  hostname 
foo.bar.baz

As you can see, we changed a hostname on-the-fly. This is not recommended way.

   Warning

Please, notice that using hostname command to configure will work temporary for a current session and will be reverted back to a value set in /etc/conf.d/hostname file with next system restart.

Now that we got a brief description of a hostname and basic configuration steps, its time to reflect another important case which is directly related to a Funtoo Linux hostname generation, a hosts.

Hosts case

As per man page hosts stands for static table lookup for hostnames and it's configuration file is /etc/hosts. Here is how it looks

   /etc/hosts
# Auto-generated hostname. Please do not remove this comment.
127.0.0.1       oleg-stable.host.funtoo.org oleg-stable localhost localhost.localdomain
::1             oleg-stable.host.funtoo.org oleg-stable localhost localhost.localdomain

As you can see it has entries from our /etc/conf.d/hostname. As you may have guessed, in Funtoo Linux /etc/hosts file entries are auto-generated, when OpenRC hostname service starts. Previously, it is used to edit /etc/hosts manually. In Funtoo Linux there is no such need.