Revision as of 17:03, 9 September 2013 by Defer (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This guide will show you how to install bootable linux livecd image to USB stick.

Get the livecd image

First you need to choose livecd distribution. SystemResqueCd is good choise because it supports 32bit and 64bit processors on the same image. Its also based on gentoo.

Download the image of your choise:

$ wget

Convert livecd image to hybrid mode

Most modern LiveCD's are already in hybrid mode. If your LiveUSB doesnt boot without this step then you have to convert it to hybrid mode. Hybrid image means image that can be booted from either CD-ROM or USB drive.

# emerge syslinux
$ isohybrid linux-livecd.iso

Write livecd image to the usb drive

Now you can write the hybrid image to usb drive. Be sure to select the device node /dev/sdX, not partition node /dev/sdX1.

# dd if=linux-livecd.iso of=/dev/sdb bs=4M

Now you can reboot. You must select the usb drive as startup device in bios.