WARNING: Work in progress. Do not edit this article unless you are the original author.
Refresh on TCP/IP model
When the ARPANet (a packet oriented network) was born in those good old seventies, engineers had to solve the problem of making computers being able to exchange packets of information over the network and they invented in 1974 something you are now using to view this page: TCP/IP! TCP/IP is a collection of various network protocols, being organized as a stack. Just like your boss does not do everything in the company and delegates at lower levels which in turn delegates at an even more lower level, no protocol in the TCP/IP suite takes all responsibilities, they are working together in a hierarchical and cooperative manner. A level of the TCP/IP stack knows what its immediate lower subordinate can do for it and whatever it will do will be done the right way and will not worry about the manner the job will be done. Also the only problem for a given level of the stack is to fulfill its own duties and deliver the service requested by the upper layer, it does not have to worry about the ultimate goal of what upper levels do.
<illustration goes here TCP/IP model>
The above illustration sounds horribly familiar : yes, it is sounds like this good old OSI model. Indeed it is a tailored view of the original OSI model and it works the exact same way: so the data sent by an application A1 (residing on computer C1) to another application A2 (residing on computer C2) goes through C1's TCP/IP stack (from top to bottom), reach the C1's lower layers that will take the responsibility to move the bits from C1 to C2 over a physical link (electrical or lights pulses, radio waves...sorry no quantum mechanism yet) . C2's lower layers will receive the bits sent by C1 and pass what has been received to the C2's TCP/IP stack (bottom to top) which will pass the data to A2. If C1 and C2 are not on the same network the process is a bit more complex because it involves relays (routers) but the global idea remains the same. Also there is no shortcuts in the process : both TCP/IP stacks are crossed in their whole, either from top to bottom for the sender or bottom to top for the receiver. The transportation process in itself is also absolutely transparent from an application's point of view: A1 knows it can rely on the TCP/IP stack to transmits some data to A2, how the data is transmitted is not its problem, A1 just assumes the data can be transmitted by some means. The TCP/IP stack is also loosely coupled to a particular network technology because its frontier is precisely the physical transportation of bits over a medium and so the physical network's technology, just the same way A1 does not care about how the TCP/IP stack will move the data from one computer to another. The TCP/IP stack itself does not care about the details about how the bits are physically moved and thus it can work with any network technology no matter the technology is Ethernet, Token Ring or FDDI for example.
The Internet layer
The goal of this article being more focused on calculation of addresses used at the Internet layer so let's forget the gory details of the TCP/IP stack works (you can find an extremely detailed discussion in How the TCP/IP stack works... to be written...). From here, we assume you have a good general understanding of its functionalities and how a network transmission works. As you know the Internet layer is responsible to handle logical addressing issues of a TCP segment (or UDP datagram) that has either to be transmitted over the network or that has been received from the network.
Who would ever need millions of addresses afterall? So in theory with those 32 bits we can have around 4 billions of computers within that network and arbitrarily retain that the very first connected computer must be given the number "0", the second one "1", the third one "2" and so on until we exhaust the address pool at number 4294967295 giving no more than 4294967296 (2^32) computers on that network because no number can be a duplicate.
Classful and classless networks
Those addresses follows the thereafter logic:
|32 bits (fixed length)|
|Network part (variable length of N bits )||Host part (length : 32 - N bits)|
- The network address : this part is uniquely assigned amongst all of the organizations in the world (i.e. No one in the world can hold the same network part)
- The host address : unique within a given network part
So in theory we can have something like this (remember the network nature is not to be unique, it hs to be be a collection of networks :
- Network 1 Host 1
- the network part : means more networks possible at the cost of having less hosts per network
- the host part : means less networks but more hosts per network
It might sounds a bit abstract but let's take an example : imagine we dedicate only 8 bits for the network part and the remaining 24 for the hosts part. What happens? First if we only
Is the network part assigned by each organization to itself? Of course not! Assignment are coordinated at the worldwide level by what we call Regional Internet Registries or RIRs which, in turn, can delegate assignments to third-parties located within their geographic jurisdiction. Those latter are called Local Internet Registries or LIRs (the system is detailed in RFC 7020). All of those RIRs are themselves put under the responsibility of now now well-known Internet Assigned Numbers Authority or IANA. As of 2014 five RIR exists :
- ARIN (American Registry for Internet Numbers) : covers North America
- LACNIC (Latin America and Caribbean Network Information Centre): covers South America and the Caribbean
- RIPE-NCC (Réseaux IP Européens / or RIPE Network Coordination Centre): covers Europe, Russia and middle east
- Afrinic (Africa Network Information Center) : covers the whole Africa
- APNIC (Asian and Pacific Network Information Centre) : covers oceania and far east.