Difference between pages "Video" and "FLOP:FFmpeg"

(Difference between pages)
m (clean up a bit to drobbins's specifications, alphabetize a bit, left some xorg config stuff as its not in other pages, add framebuffer specific to other.)
 
(add technical details to the FLOP)
 
Line 1: Line 1:
The purpose of this page is to give you streamlined steps for setting up your video hardware for X, and desktop environments such as GNOME.
+
{{FLOP
 
+
|Created on=2015/01/31
{{Important|Editors: OK, I've decided to change the plans for this page. This is going to be a page similar to [[Subarches]]. The idea is to help people to identify their hardware and guide them toward the correct driver for their chipset. The focus will be primarily on defining the types of hardware that are supported, what products they appear in, and how to know if you have this hardware, and also give people good general overview of options available to them (free vs. proprietary, etc.) Other important topics that apply to all drivers, like <code>eselect opengl</code> should be covered as well. This will then serve as the meta-page for Video support, with individual ebuild pages holding the details for each driver.}}
+
|Summary=Funtoo Linux prefers FFmpeg. Some enlightenment about our choice and why we prefer this  or could switch to alternative in future.
 
+
|Author=Oleg, Mgorny
== Video Drivers ==
+
|Maintainer=Oleg, Mgorny
 
+
|Reference Bug=FL-844
First determine which video card you have and which driver it requires.
+
 
+
<console>###i## lspci -nn | grep -i vga</console>
+
 
+
to see what your system is using:
+
<console>###i## lspci -k</console>
+
 
+
Once hardware is determined use the following sections to add or edit the <code>VIDEO_CARDS</code> global variable in <code>/etc/portage/[[make.conf]]</code>.  For more granular details including kernel configurations, frame buffer settings, and xorg configurations: see specific package page links.
+
 
+
=== AMD/ATI ===
+
Users can choose between free ({{Package|x11-drivers/xf86-video-ati}}) and proprietary ({{Package|x11-drivers/ati-drivers}}) video drivers. The free drivers are recommended as the proprietary drivers are not currently maintained very well by AMD.
+
 
+
==== Cards ====
+
* '''NEED TABLE''': available drivers, hardware gen, required VIDEO_CARDS variable
+
 
+
==== {{package|x11-drivers/xf86-video-ati}} ====
+
Open source drivers:
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="radeon"
+
 
}}
 
}}
 +
== Introduction ==
 +
FFmpeg and Libav are library sets for multimedia decoding (and more). Both libraries expose similar API and features.
  
==== {{Package|x11-drivers/ati-drivers}} ====
+
Both project have common origins and diverged only recently. The developers share the same bad coding practices causing permanent lack of API and ABI stability, therefore requiring frequent rebuilds of reverse dependencies.
Closed source drivers:
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="fglrx"
+
}}
+
  
=== Intel ===
+
Worse than that, after the split projects use colliding SONAMEs for libraries with potentially different ABI. This means that after switching from one implementation to another, the reverse dependencies may become broken instantly (preserved-libs doesn't help) and need to be rebuilt ASAP.
==== Cards ====
+
* '''NEED TABLE''': available drivers, hardware gen, VIDEO_CARDS variable
+
  
==== gen 1&2 ====
+
Many packages for video decoding, are done via FFmpeg or Libav. Differences between FFmpeg and Libav can have a major impact on its behavior: the number of files it can decode, whether it decodes correctly, what video and audio filters are provided, network behavior, and more.
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="intel"
+
}}
+
  
==== gen 3 ====
+
== Current status ==
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
=== Gentoo ===
VIDEO_CARDS="intel i915"
+
Gentoo supports both ffmpeg and libav, with a weak preference towards libav. The preference is caused by package order in virtual/ffmpeg — when no other circumstance affects the package choice, Portage will prefer libav. However, if ffmpeg is already installed or a package incompatible with libav is requested, Portage will use ffmpeg instead.
}}
+
  
==== gen 4+ ====
+
There are two major technical issues with this design:
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
# there is no technically correct way of forcing rebuilds on ABI changes — subslot dependencies do not work with virtuals or || () deps,
VIDEO_CARDS="intel i965"
+
# there is no way of forcing rebuilds when switching from libav to ffmpeg, and the other way around.
}}
+
  
 +
=== Funtoo ===
 +
Funtoo supports only FFmpeg. It is forced by Funtoo version of virtual/ffmpeg. While this provides the ability to avoid the Gentoo issues, virtual still breaks ABI rebuilds.
  
=== Nvidia ===
+
Decision made by Oleg, forced by #funtoo community and bugtracker reports.
Users can choose between Open (nouveau) and Closed-Source {{package|x11-drivers/nvidia-drivers}} video drivers.  Open nouveau drivers are preferred as many kernels conflict with closed-source drivers.
+
 
+
==== Cards ====
+
* '''NEED TABLE''': nouveau + nvidia-drivers versions, hardware gen, required VIDEO_CARDS variable
+
 
+
==== Nouveau ====
+
Open source drivers:
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="nouveau"
+
}}
+
 
+
==== {{Package|x11-drivers/nvidia-drivers}}====
+
Closed source drivers:
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="nvidia"
+
}}
+
 
+
see [[Uvesafb]] for framebuffering.
+
 
+
=== Other ===
+
==== Multiple Cards (Hybrid Graphics) ====
+
recommended [[make.conf]] VIDEO_CARDS
+
Hybrid intel/ati:
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="fglrx intel"
+
}}
+
 
+
==== Virtual Machine Guests ====
+
These settings are used by Parallels VM's and presumably others
+
{{file|name=/etc/portage/make.conf|lang=|desc=set video global variable|body=
+
VIDEO_CARDS="vesa vga"
+
}}
+
 
+
==== Framebuffer Specific ====
+
=====[[Uvesafb]]=====
+
  
====={{package|x11-drivers/xf86-video-vesa}}=====
+
== Future status ==
 +
=== Gentoo ===
 +
There is a planned Gentoo change which will eventually replace virtual/ffmpeg and explicit || () deps with 'libav' USE flag. The flag will be added to all packages that support both FFmpeg and libav. When the flag is enabled, the package will use libav; otherwise it will use FFmpeg. The choice of flag name is forced by the fact that USE=ffmpeg is already used as generic ffmpeg-or-libav flag.
  
==== Raspberry Pi ====
+
This change fixes both Gentoo issues:
{{SectionNeedsUpdates}}
+
# USE-conditional dependencies allow subslot dependencies to force rebuilds on ABI changes,
 +
# provider change will force rebuild because of USE flag change.
  
== Install ==
+
The change may also eventually make it possible to install FFmpeg and libav side-by-side. Until then, the flag state would involve 'strong' preference of one implementation over the other, and user will have to change USE=libav as a global flag. '''Installing a package that supports only one of the two implementations will result in blocker that needs to be handled manually'''.
Once your video cards variables are set in [[make.conf]], and kernel configurations are arranged merge changes into your system:
+
  
<console>###i## emerge -avuND world</console>
+
=== Funtoo ===
 +
If Funtoo decides to keep supporting FFmpeg only, it only needs to mask libav in the profiles. Then dependencies on updated packages will unconditionally use FFmpeg. Eventually Funtoo will want to remove virtual/ffmpeg and depend on media-video/ffmpeg:0= directly in forked packages.
  
{{note|we should change world to the specific package that pulls in all the other video stuff so if this page is ran on an old stale system it doesn't pull in 50 bazillion packages}}
+
If Funtoo decides to start supporting libav as an option, it may need to add USE="-libav" to profiles if Gentoo decides for libav default. Funtoo will want to progressively update forked packages to match Gentoo dependency specifications.
  
==Configure X.org==
+
== Detailed information on FFmpeg and libav ==
===Nvidia===
+
=== FFmpeg and Libav history ===
nvidia-xconfig, etc.
+
In 2011, parts of the FFmpeg developers were unhappy about the FFmpeg leadership, and decided to take over. This didn't quite work out. Apparently Fabrice Bellard, original FFmpeg developer and owner of the ffmpeg.org domain name, decided not to hand over the domain name to the new maintainers. So they followed Plan B, and forked FFmpeg, resulting in Libav. Since then, Libav did its own development, and completely ignored whatever FFmpeg did. FFmpeg, on the other hand, started to merge literally everything Libav did.
  
===AMD/ATI===
+
The reason for the fork is most likely that the developers hate each other. While this formulation seems somewhat sloppy, it is most likely the truth. To this date, the #libav-devel IRC channel still has Michael Niedermayer (the FFmpeg maintainer since 2004 according to Wikipedia) on their ban list (similar misbehavior is exhibited by some FFmpeg developers). There is little to no cooperation between the two projects.
aticonfig, etc.
+
<console># ##i##aticonfig --initial --input=/etc/X11/xorg.conf</console>
+
  
==Finalize and test==
+
More about FFmpeg's history and the fork incident can be found on Wikipedia
==== eselect opengl ====
+
{{note|change the number of card eselected to match the card of your system}}
+
<console>###i## eselect opengl list
+
###i## eselect opengl set 1</console>
+
  
==== eselect opencl ====
+
=== Situation today ===
{{note|some setups can make use of opencl}}
+
FFmpeg has more features and slightly more active development than Libav, going by mailing list and commit volume. In particular, FFmpeg's features are a superset of Libav's features. This is because FFmpeg merges Libav's git master on a daily basis. Libav on the other hand seems to prefer to ignore FFmpeg development (with occasional cherry-picking of bug fixes and features).
<console>###i##eselect opencl list
+
###i##eselect opencl set 1</console>
+
* reboot/test process
+
  
==Troubleshooting==
+
Some Linux distributions, especially those that had Libav developers as FFmpeg package maintainers, replaced FFmpeg with Libav, while other distributions stick with FFmpeg. Application developers typically have to make sure their code works with both libraries. This can be trivial to hard, depending on the details. One larger problem is that the difference between the libraries makes it hard to keep up a consistent level of the user experience, since either library might silently or blatantly be not up to the task. It also encourages library users to implement some features themselves, rather than dealing with the library differences, or the question to which project to contribute.
* what to do if only a blank screen
+
  
Category:Video Cards wrap me with braces when im snazzy
+
FFmpeg and Libav developers also seem to have the tendency to ignore the damage their rivalry is causing. Apparently fighting out these issues on the users' backs is better than reconciling. This means everyone using these libraries either has to suffer from the differences, or reimplement functionality that is not the same between FFmpeg and Libav.
Category:First Steps wrap me with braces when im snazzy
+
{{FLOPFooter}}

Revision as of 23:22, January 31, 2015

Created on
2015/01/31
Original Author(s)
Oleg Vinichenko,Michał Górny
Current Maintainer(s)
Oleg Vinichenko,Michał Górny
Status
Reference Bug
FL-844

Funtoo Linux Optimization Proposal: FFmpeg

Funtoo Linux prefers FFmpeg. Some enlightenment about our choice and why we prefer this or could switch to alternative in future.

Introduction

FFmpeg and Libav are library sets for multimedia decoding (and more). Both libraries expose similar API and features.

Both project have common origins and diverged only recently. The developers share the same bad coding practices causing permanent lack of API and ABI stability, therefore requiring frequent rebuilds of reverse dependencies.

Worse than that, after the split projects use colliding SONAMEs for libraries with potentially different ABI. This means that after switching from one implementation to another, the reverse dependencies may become broken instantly (preserved-libs doesn't help) and need to be rebuilt ASAP.

Many packages for video decoding, are done via FFmpeg or Libav. Differences between FFmpeg and Libav can have a major impact on its behavior: the number of files it can decode, whether it decodes correctly, what video and audio filters are provided, network behavior, and more.

Current status

Gentoo

Gentoo supports both ffmpeg and libav, with a weak preference towards libav. The preference is caused by package order in virtual/ffmpeg — when no other circumstance affects the package choice, Portage will prefer libav. However, if ffmpeg is already installed or a package incompatible with libav is requested, Portage will use ffmpeg instead.

There are two major technical issues with this design:

  1. there is no technically correct way of forcing rebuilds on ABI changes — subslot dependencies do not work with virtuals or || () deps,
  2. there is no way of forcing rebuilds when switching from libav to ffmpeg, and the other way around.

Funtoo

Funtoo supports only FFmpeg. It is forced by Funtoo version of virtual/ffmpeg. While this provides the ability to avoid the Gentoo issues, virtual still breaks ABI rebuilds.

Decision made by Oleg, forced by #funtoo community and bugtracker reports.

Future status

Gentoo

There is a planned Gentoo change which will eventually replace virtual/ffmpeg and explicit || () deps with 'libav' USE flag. The flag will be added to all packages that support both FFmpeg and libav. When the flag is enabled, the package will use libav; otherwise it will use FFmpeg. The choice of flag name is forced by the fact that USE=ffmpeg is already used as generic ffmpeg-or-libav flag.

This change fixes both Gentoo issues:

  1. USE-conditional dependencies allow subslot dependencies to force rebuilds on ABI changes,
  2. provider change will force rebuild because of USE flag change.

The change may also eventually make it possible to install FFmpeg and libav side-by-side. Until then, the flag state would involve 'strong' preference of one implementation over the other, and user will have to change USE=libav as a global flag. Installing a package that supports only one of the two implementations will result in blocker that needs to be handled manually.

Funtoo

If Funtoo decides to keep supporting FFmpeg only, it only needs to mask libav in the profiles. Then dependencies on updated packages will unconditionally use FFmpeg. Eventually Funtoo will want to remove virtual/ffmpeg and depend on media-video/ffmpeg:0= directly in forked packages.

If Funtoo decides to start supporting libav as an option, it may need to add USE="-libav" to profiles if Gentoo decides for libav default. Funtoo will want to progressively update forked packages to match Gentoo dependency specifications.

Detailed information on FFmpeg and libav

FFmpeg and Libav history

In 2011, parts of the FFmpeg developers were unhappy about the FFmpeg leadership, and decided to take over. This didn't quite work out. Apparently Fabrice Bellard, original FFmpeg developer and owner of the ffmpeg.org domain name, decided not to hand over the domain name to the new maintainers. So they followed Plan B, and forked FFmpeg, resulting in Libav. Since then, Libav did its own development, and completely ignored whatever FFmpeg did. FFmpeg, on the other hand, started to merge literally everything Libav did.

The reason for the fork is most likely that the developers hate each other. While this formulation seems somewhat sloppy, it is most likely the truth. To this date, the #libav-devel IRC channel still has Michael Niedermayer (the FFmpeg maintainer since 2004 according to Wikipedia) on their ban list (similar misbehavior is exhibited by some FFmpeg developers). There is little to no cooperation between the two projects.

More about FFmpeg's history and the fork incident can be found on Wikipedia

Situation today

FFmpeg has more features and slightly more active development than Libav, going by mailing list and commit volume. In particular, FFmpeg's features are a superset of Libav's features. This is because FFmpeg merges Libav's git master on a daily basis. Libav on the other hand seems to prefer to ignore FFmpeg development (with occasional cherry-picking of bug fixes and features).

Some Linux distributions, especially those that had Libav developers as FFmpeg package maintainers, replaced FFmpeg with Libav, while other distributions stick with FFmpeg. Application developers typically have to make sure their code works with both libraries. This can be trivial to hard, depending on the details. One larger problem is that the difference between the libraries makes it hard to keep up a consistent level of the user experience, since either library might silently or blatantly be not up to the task. It also encourages library users to implement some features themselves, rather than dealing with the library differences, or the question to which project to contribute.

FFmpeg and Libav developers also seem to have the tendency to ignore the damage their rivalry is causing. Apparently fighting out these issues on the users' backs is better than reconciling. This means everyone using these libraries either has to suffer from the differences, or reimplement functionality that is not the same between FFmpeg and Libav.