Difference between revisions of "Install/Download LiveCD/zh-cn"

From Funtoo
Jump to navigation Jump to search
(Created page with "输入密码后,现在需要确定可启动系统的 IP 地址,然后就可以使用 {{c|ssh}} 连接到它。要确定 LiveCD 当前使用的 IP 地址,输入 {{c|ifcon...")
(Created page with "另外,还可以通过 iproute2 {{c|ip}} 工具确定 IP 地址:")
Line 48: Line 48:
}}
}}


Alternatively, determining of an IP address is possible with iproute2 {{c|ip}} tool:
另外,还可以通过 iproute2 {{c|ip}} 工具确定 IP 地址:


{{console|body=
{{console|body=

Revision as of 21:12, March 11, 2021

Other languages:
English • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎русский • ‎中文(中国大陆)‎ • ‎中文(台灣)‎

安装指南:下载 LiveCD

Install Guide, Chapter 1 < Prev Next >

In order to install Funtoo Linux, you will first need to boot your computer using a Linux-based Live CD or USB stick. We currently recommend the Gentoo Minimal Installation CD as it contains a modern kernel and updated booting for UEFI systems, and is a quick download. It can be burned to CD/DVD or installed on a USB stick. Download it here:

要将其复制到 U 盘上进行启动,使用以下命令:

root # dd if=install-amd64-minimal-20210103T214503Z.iso of=/dev/sdx bs=4k status=progress

当然,需要将 /dev/sdx 改为指向系统中 U 盘的块设备。

接入网络

关于从 LiveCD 设置接入网络的步骤,请参见 Funtoo:New Install Experience/LiveCD 页面。

远程安装

Alternatively, you can log into your bootable environment over the network via SSH to perform the install from another computer, and this may be more convenient way to install Funtoo Linux.

First ensure that sshd is running. For the Gentoo Minimal Installation CD, you will need to start sshd as follows:

root # /etc/init.d/sshd start

如果要远程完成安装,方法如下。首先,需要确保可启动 CD/USB 镜像已正常连接网络。然后,需要设置一个root密码:

root # passwd
New password: ********
Retype new password: ********
passwd: password updated successfully


输入密码后,现在需要确定可启动系统的 IP 地址,然后就可以使用 ssh 连接到它。要确定 LiveCD 当前使用的 IP 地址,输入 ifconfig

root # ifconfig

另外,还可以通过 iproute2 ip 工具确定 IP 地址:

root # ip addr show

One of the interfaces should have an IP address (listed as inet addr:) from your LAN. You can then connect remotely, from another system on your LAN, your bootable environment, and perform steps from the comfort of an existing OS. On your remote system, type the following, replacing 1.2.3.4 with the IP address of the LiveCD. Connecting from an existing Linux or MacOS system would look something like this:

remote system $ ssh root@1.2.3.4
Password: **********
   Note

如果想从现有的微软 Windows 系统进行远程连接,则需要下载一个 Windows 的 SSH 客户端,比如 OpenSSH

通过 SSH 登录后,现在已经远程连接到 LiveCD,可以进行安装步骤。

Install Guide, Chapter 1 < Prev Next >