安裝教學 : 下載LiveCD
|Install Guide, Chapter 1||< Prev||Next >|
In order to install Funtoo Linux, you will first need to boot your computer using a Linux-based Live CD or USB stick. We recommend the Gentoo-based System Rescue CD as it contains lots of tools and utilities and supports both 32-bit and 64-bit systems. It can be burned to CD/DVD or installed on a USB stick. Download it here:
要安裝Funtoo Linux，首先你需要一個Linux的Live CD或是隨身碟來啟動你的電腦。我們推薦Gentoo系的System Rescue CD ，因為它附有很多工具而且同時支援32和64位元的系統。你可以將它燒錄進CD/DVD或是安裝在隨身碟裡。在這裡可以下載他們:
- 從這裡下載 funtoo.org
沒有畫面: 在使用UEFI開機時System Rescue CD 可能沒有正確初始化顯示卡 (參閱 FL-2030) 如果碰到這種情況，在System Rescue CD啟動進入GRUB目錄時按下
insmod all_video 然後重新啟動。 這個Bug已經回報給System Rescue CD的開發者了。
如果你正在使用舊版本的System Rescue CD, 欲安裝64位元的系統，請確認你在啟動時選擇了
rescue64 的內核，System Rescue CD在預設的情況下會以32位元模式啟動，但在最新的版本中 系統會嘗試自動偵測64位元的處理器。
如果你已經成功啟動System Rescue CD務必確認是否已經連上網路，因為安裝Funtoo Linux必須要用到網路。
root # ping www.google.com PING www.google.com (184.108.40.206) 56(84) bytes of data. 64 bytes from den03s10-in-f4.1e100.net (220.127.116.11): icmp_seq=1 ttl=57 time=30.1 ms
If the ping is successful (you see
64 bytes messages as above,) then your Network is set up. Hit Control-C to stop the ping.
If you need to set up a WiFi connection for Internet access, then this can be accomplished using the
nmtui command-line tool:
root # nmtui
Alternatively, you can log into System Rescue CD over the network via SSH to perform the install from another computer, and this may be more convenient way to install Funtoo Linux.
If you'd like to complete the install remotely, here's how. First, you will need to ensure that System Rescue CD has a functioning network connection. Then, you will need to set a root password for System Rescue CD:
root # passwd New password: ******** Retype new password: ******** passwd: password updated successfully
Once you have typed in a password, you will now need to determine the IP address of System Rescue CD, and then you can use
ssh to connect to it. To determine the IP address currently being used by System Rescue CD, type
root # ifconfig
Alternatively, determining of an IP address is possible with iproute2
root # ip addr show
One of the interfaces should have an IP address (listed as
inet addr:) from your LAN. You can then connect remotely, from another system on your LAN, to System Rescue CD, and perform steps from the comfort of an existing OS. On your remote system, type the following, replacing
18.104.22.168 with the IP address of System Rescue CD. Connecting from an existing Linux or MacOS system would look something like this:
(remote system) $ ssh firstname.lastname@example.org Password: **********
If you'd like to connect remotely from an existing Microsoft Windows system, you'll need to download an SSH client for Windows, such as PuTTY.
After you've logged in via SSH, you're now connected remotely to System Rescue CD and can perform the installation steps.