Talk:Funtoo Linux Installation on ARM
Jump to navigation
Jump to search
known working raspi 4 /boot/cmdline.txt
root@raspberrypi:/home/pi# cat /boot/cmdline.txt console=serial0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles root@raspberrypi:/boot# ls -al total 54603 drwxr-xr-x 3 root root 3584 Dec 31 1969 . drwxr-xr-x 21 root root 4096 Aug 20 07:09 .. -rwxr-xr-x 1 root root 25195 Nov 5 17:35 bcm2708-rpi-b.dtb -rwxr-xr-x 1 root root 25458 Nov 5 17:35 bcm2708-rpi-b-plus.dtb -rwxr-xr-x 1 root root 24806 Nov 5 17:35 bcm2708-rpi-b-rev1.dtb -rwxr-xr-x 1 root root 24928 Nov 5 17:35 bcm2708-rpi-cm.dtb -rwxr-xr-x 1 root root 24900 Nov 5 17:35 bcm2708-rpi-zero.dtb -rwxr-xr-x 1 root root 26093 Nov 5 17:35 bcm2708-rpi-zero-w.dtb -rwxr-xr-x 1 root root 26333 Nov 5 17:35 bcm2709-rpi-2-b.dtb -rwxr-xr-x 1 root root 26482 Nov 5 17:35 bcm2710-rpi-2-b.dtb -rwxr-xr-x 1 root root 27980 Nov 5 17:35 bcm2710-rpi-3-b.dtb -rwxr-xr-x 1 root root 28599 Nov 5 17:35 bcm2710-rpi-3-b-plus.dtb -rwxr-xr-x 1 root root 26289 Nov 5 17:35 bcm2710-rpi-cm3.dtb -rwxr-xr-x 1 root root 47516 Nov 5 17:35 bcm2711-rpi-4-b.dtb -rwxr-xr-x 1 root root 47621 Nov 5 17:35 bcm2711-rpi-cm4.dtb -rwxr-xr-x 1 root root 52480 Nov 5 17:36 bootcode.bin -rwxr-xr-x 1 root root 160 Nov 5 16:54 cmdline.txt -rwxr-xr-x 1 root root 1819 Nov 5 18:44 config.txt -rwxr-xr-x 1 root root 18693 Nov 5 17:35 COPYING.linux -rwxr-xr-x 1 root root 3163 Nov 5 17:36 fixup4cd.dat -rwxr-xr-x 1 root root 5417 Nov 5 17:36 fixup4.dat -rwxr-xr-x 1 root root 8426 Nov 5 17:36 fixup4db.dat -rwxr-xr-x 1 root root 8430 Nov 5 17:36 fixup4x.dat -rwxr-xr-x 1 root root 3163 Nov 5 17:36 fixup_cd.dat -rwxr-xr-x 1 root root 7289 Nov 5 17:36 fixup.dat -rwxr-xr-x 1 root root 10276 Nov 5 17:36 fixup_db.dat -rwxr-xr-x 1 root root 10278 Nov 5 17:36 fixup_x.dat -rwxr-xr-x 1 root root 145 Aug 20 07:09 issue.txt -rwxr-xr-x 1 root root 5772856 Nov 5 17:35 kernel7.img -rwxr-xr-x 1 root root 6132440 Nov 5 17:35 kernel7l.img -rwxr-xr-x 1 root root 16036352 Nov 5 17:35 kernel8.img -rwxr-xr-x 1 root root 5453560 Nov 5 17:35 kernel.img -rwxr-xr-x 1 root root 1594 Nov 5 17:36 LICENCE.broadcom -rwxr-xr-x 1 root root 337 Nov 5 16:54 os_config.json drwxr-xr-x 2 root root 17408 Nov 5 17:36 overlays -rwxr-xr-x 1 root root 785532 Nov 5 17:36 start4cd.elf -rwxr-xr-x 1 root root 3728296 Nov 5 17:36 start4db.elf -rwxr-xr-x 1 root root 2225376 Nov 5 17:36 start4.elf -rwxr-xr-x 1 root root 2985256 Nov 5 17:36 start4x.elf -rwxr-xr-x 1 root root 785532 Nov 5 17:36 start_cd.elf -rwxr-xr-x 1 root root 4800200 Nov 5 17:36 start_db.elf -rwxr-xr-x 1 root root 2949600 Nov 5 17:36 start.elf -rwxr-xr-x 1 root root 3708904 Nov 5 17:36 start_x.elf root@raspberrypi:/boot# cat /etc/fstab proc /proc proc defaults 0 0 /dev/mmcblk0p6 /boot vfat defaults 0 2 /dev/mmcblk0p7 / ext4 defaults,noatime 0 1 root@raspberrypi:/boot# ls -al total 54603 drwxr-xr-x 3 root root 3584 Dec 31 1969 . drwxr-xr-x 21 root root 4096 Aug 20 07:09 .. -rwxr-xr-x 1 root root 25195 Nov 5 17:35 bcm2708-rpi-b.dtb -rwxr-xr-x 1 root root 25458 Nov 5 17:35 bcm2708-rpi-b-plus.dtb -rwxr-xr-x 1 root root 24806 Nov 5 17:35 bcm2708-rpi-b-rev1.dtb -rwxr-xr-x 1 root root 24928 Nov 5 17:35 bcm2708-rpi-cm.dtb -rwxr-xr-x 1 root root 24900 Nov 5 17:35 bcm2708-rpi-zero.dtb -rwxr-xr-x 1 root root 26093 Nov 5 17:35 bcm2708-rpi-zero-w.dtb -rwxr-xr-x 1 root root 26333 Nov 5 17:35 bcm2709-rpi-2-b.dtb -rwxr-xr-x 1 root root 26482 Nov 5 17:35 bcm2710-rpi-2-b.dtb -rwxr-xr-x 1 root root 27980 Nov 5 17:35 bcm2710-rpi-3-b.dtb -rwxr-xr-x 1 root root 28599 Nov 5 17:35 bcm2710-rpi-3-b-plus.dtb -rwxr-xr-x 1 root root 26289 Nov 5 17:35 bcm2710-rpi-cm3.dtb -rwxr-xr-x 1 root root 47516 Nov 5 17:35 bcm2711-rpi-4-b.dtb -rwxr-xr-x 1 root root 47621 Nov 5 17:35 bcm2711-rpi-cm4.dtb -rwxr-xr-x 1 root root 52480 Nov 5 17:36 bootcode.bin -rwxr-xr-x 1 root root 160 Nov 5 16:54 cmdline.txt -rwxr-xr-x 1 root root 1819 Nov 5 18:44 config.txt -rwxr-xr-x 1 root root 18693 Nov 5 17:35 COPYING.linux -rwxr-xr-x 1 root root 3163 Nov 5 17:36 fixup4cd.dat -rwxr-xr-x 1 root root 5417 Nov 5 17:36 fixup4.dat -rwxr-xr-x 1 root root 8426 Nov 5 17:36 fixup4db.dat -rwxr-xr-x 1 root root 8430 Nov 5 17:36 fixup4x.dat -rwxr-xr-x 1 root root 3163 Nov 5 17:36 fixup_cd.dat -rwxr-xr-x 1 root root 7289 Nov 5 17:36 fixup.dat -rwxr-xr-x 1 root root 10276 Nov 5 17:36 fixup_db.dat -rwxr-xr-x 1 root root 10278 Nov 5 17:36 fixup_x.dat -rwxr-xr-x 1 root root 145 Aug 20 07:09 issue.txt -rwxr-xr-x 1 root root 5772856 Nov 5 17:35 kernel7.img -rwxr-xr-x 1 root root 6132440 Nov 5 17:35 kernel7l.img -rwxr-xr-x 1 root root 16036352 Nov 5 17:35 kernel8.img -rwxr-xr-x 1 root root 5453560 Nov 5 17:35 kernel.img -rwxr-xr-x 1 root root 1594 Nov 5 17:36 LICENCE.broadcom -rwxr-xr-x 1 root root 337 Nov 5 16:54 os_config.json drwxr-xr-x 2 root root 17408 Nov 5 17:36 overlays -rwxr-xr-x 1 root root 785532 Nov 5 17:36 start4cd.elf -rwxr-xr-x 1 root root 3728296 Nov 5 17:36 start4db.elf -rwxr-xr-x 1 root root 2225376 Nov 5 17:36 start4.elf -rwxr-xr-x 1 root root 2985256 Nov 5 17:36 start4x.elf -rwxr-xr-x 1 root root 785532 Nov 5 17:36 start_cd.elf -rwxr-xr-x 1 root root 4800200 Nov 5 17:36 start_db.elf -rwxr-xr-x 1 root root 2949600 Nov 5 17:36 start.elf -rwxr-xr-x 1 root root 3708904 Nov 5 17:36 start_x.elf root@raspberrypi:/boot# cat /etc/fstab proc /proc proc defaults 0 0 /dev/mmcblk0p6 /boot vfat defaults 0 2 /dev/mmcblk0p7 / ext4 defaults,noatime 0 1 root@raspberrypi:/home/pi# lsmod Module Size Used by rfcomm 49152 4 bnep 20480 2 hci_uart 40960 1 btbcm 16384 1 hci_uart bluetooth 372736 29 hci_uart,bnep,btbcm,rfcomm ecdh_generic 16384 1 bluetooth ecc 40960 1 ecdh_generic fuse 118784 3 8021q 32768 0 garp 16384 1 8021q stp 16384 1 garp llc 16384 2 garp,stp joydev 20480 0 vc4 241664 7 brcmfmac 319488 0 brcmutil 20480 1 brcmfmac cec 49152 1 vc4 v3d 69632 5 drm_kms_helper 184320 3 vc4 sha256_generic 16384 0 libsha256 20480 1 sha256_generic gpu_sched 36864 1 v3d cfg80211 692224 1 brcmfmac drm 466944 14 v3d,vc4,gpu_sched,drm_kms_helper bcm2835_v4l2 49152 0 rfkill 28672 6 bluetooth,cfg80211 videobuf2_vmalloc 16384 1 bcm2835_v4l2 bcm2835_codec 36864 0 bcm2835_isp 32768 0 v4l2_mem2mem 32768 1 bcm2835_codec bcm2835_mmal_vchiq 28672 3 bcm2835_isp,bcm2835_codec,bcm2835_v4l2 videobuf2_dma_contig 20480 2 bcm2835_isp,bcm2835_codec videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_vmalloc videobuf2_v4l2 28672 4 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem raspberrypi_hwmon 16384 0 videobuf2_common 57344 5 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2 drm_panel_orientation_quirks 16384 1 drm snd_bcm2835 28672 3 videodev 237568 6 bcm2835_isp,bcm2835_codec,videobuf2_common,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2 mc 40960 6 bcm2835_isp,bcm2835_codec,videobuf2_common,videodev,v4l2_mem2mem,videobuf2_v4l2 vc_sm_cma 32768 7 bcm2835_isp,bcm2835_mmal_vchiq snd_soc_core 200704 1 vc4 snd_compress 20480 1 snd_soc_core snd_pcm_dmaengine 16384 1 snd_soc_core snd_pcm 98304 4 vc4,snd_pcm_dmaengine,snd_bcm2835,snd_soc_core snd_timer 32768 1 snd_pcm snd 73728 11 snd_compress,snd_timer,snd_bcm2835,snd_soc_core,snd_pcm syscopyarea 16384 1 drm_kms_helper sysfillrect 16384 1 drm_kms_helper sysimgblt 16384 1 drm_kms_helper rpivid_mem 16384 0 fb_sys_fops 16384 1 drm_kms_helper uio_pdrv_genirq 16384 0 uio 20480 1 uio_pdrv_genirq i2c_dev 20480 0 ip_tables 28672 0 x_tables 32768 1 ip_tables ipv6 466944 38 root@raspberrypi:/home/pi# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.72-v7l+ (dom@buildbot) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #1356 SMP Thu Oct 22 13:57:51 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920 [ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=DC:A6:32:8F:10:F7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x17cc0000-0x1bcc0000] (64MB) [ 0.000000] Memory: 3655596K/4050944K available (10240K kernel code, 745K rwdata, 2836K rodata, 2048K init, 856K bss, 133204K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31086 entries in 61 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x520 with crng_init=0 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000022] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000097] bcm2835: system timer (irq = 17) [ 0.000740] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000755] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000770] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000783] Switching to timer-based delay loop, resolution 18ns [ 0.001012] Console: colour dummy device 80x30 [ 0.001045] printk: console [tty1] enabled [ 0.001096] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001117] pid_max: default: 32768 minimum: 301 [ 0.001264] LSM: Security Framework initializing [ 0.001454] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001476] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002729] Disabling memory control group subsystem [ 0.002850] CPU: Testing write buffer coherency: ok [ 0.003354] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004259] Setting up static identity map for 0x200000 - 0x20003c [ 0.004466] rcu: Hierarchical SRCU implementation. [ 0.005136] smp: Bringing up secondary CPUs ... [ 0.006313] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007613] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008865] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009020] smp: Brought up 1 node, 4 CPUs [ 0.009036] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009050] CPU: All CPU(s) started in HYP mode. [ 0.009062] CPU: Virtualization extensions available. [ 0.009877] devtmpfs: initialized [ 0.023614] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.023870] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023899] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.030547] pinctrl core: initialized pinctrl subsystem [ 0.031610] NET: Registered protocol family 16 [ 0.035482] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.036072] audit: initializing netlink subsys (disabled) [ 0.036327] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.037491] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.037505] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.037838] Serial: AMBA PL011 UART driver [ 0.041598] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.060816] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-10-22 13:59, variant start [ 0.070833] raspberrypi-firmware soc:firmware: Firmware hash is 74e754ff8947c58d2773253f77f6f68a303188f8 [ 0.125567] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.130608] vgaarb: loaded [ 0.131104] SCSI subsystem initialized [ 0.131333] usbcore: registered new interface driver usbfs [ 0.131390] usbcore: registered new interface driver hub [ 0.131511] usbcore: registered new device driver usb [ 0.131841] usb_phy_generic phy: phy supply vcc not found, using dummy regulator [ 0.133729] clocksource: Switched to clocksource arch_sys_counter [ 0.840782] VFS: Disk quotas dquot_6.6.0 [ 0.840883] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.841044] FS-Cache: Loaded [ 0.841240] CacheFiles: Loaded [ 0.842209] simple-framebuffer 3e267000.framebuffer: framebuffer at 0x3e267000, 0x960000 bytes, mapped to 0x(ptrval) [ 0.842229] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 0.842742] Console: switching to colour frame buffer device 240x80 [ 0.854947] simple-framebuffer 3e267000.framebuffer: fb0: simplefb registered! [ 0.865291] thermal_sys: Registered thermal governor 'step_wise' [ 0.865644] NET: Registered protocol family 2 [ 0.866394] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.866425] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.866482] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.866547] TCP: Hash tables configured (established 8192 bind 8192) [ 0.866692] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.866722] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.866972] NET: Registered protocol family 1 [ 0.867718] RPC: Registered named UNIX socket transport module. [ 0.867731] RPC: Registered udp transport module. [ 0.867743] RPC: Registered tcp transport module. [ 0.867756] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.867777] PCI: CLS 0 bytes, default 64 [ 0.869768] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.871942] Initialise system trusted keyrings [ 0.872207] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.883052] FS-Cache: Netfs 'nfs' registered for caching [ 0.883836] NFS: Registering the id_resolver key type [ 0.883874] Key type id_resolver registered [ 0.883887] Key type id_legacy registered [ 0.883910] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.885021] Key type asymmetric registered [ 0.885035] Asymmetric key parser 'x509' registered [ 0.885225] bounce: pool size: 64 pages [ 0.885267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.885502] io scheduler mq-deadline registered [ 0.885516] io scheduler kyber registered [ 0.889459] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.889483] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.889555] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 0.889627] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 0.945876] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) [ 0.946202] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.946220] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.946241] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.946299] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.946569] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.949866] PCI: bus0: Fast back to back transfers disabled [ 0.950098] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.950246] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.950679] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.954000] PCI: bus1: Fast back to back transfers disabled [ 0.954060] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.954083] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.954165] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.954189] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.954504] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.954733] pcieport 0000:00:00.0: PME: Signaling with IRQ 55 [ 0.955150] pcieport 0000:00:00.0: AER: enabled with IRQ 55 [ 0.955499] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.962420] iproc-rng200 fe104000.rng: hwrng registered [ 0.962759] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.963408] vc-sm: Videocore shared memory driver [ 0.964050] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.976173] brd: module loaded [ 0.988477] loop: module loaded [ 0.989900] Loading iSCSI transport class v2.0-870. [ 0.991867] libphy: Fixed MDIO Bus: probed [ 0.992495] bcmgenet fd580000.ethernet: failed to get enet clock [ 0.992514] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 0.992537] bcmgenet fd580000.ethernet: failed to get enet-wol clock [ 0.992559] bcmgenet fd580000.ethernet: failed to get enet-eee clock [ 0.992586] bcmgenet: Skipping UMAC reset [ 1.003813] libphy: bcmgenet MII bus: probed [ 1.093840] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.094872] usbcore: registered new interface driver r8152 [ 1.094936] usbcore: registered new interface driver lan78xx [ 1.094993] usbcore: registered new interface driver smsc95xx [ 1.095420] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.095454] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.098052] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 1.099354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.099372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.099388] usb usb1: Product: xHCI Host Controller [ 1.099404] usb usb1: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd [ 1.099419] usb usb1: SerialNumber: 0000:01:00.0 [ 1.100022] hub 1-0:1.0: USB hub found [ 1.100119] hub 1-0:1.0: 1 port detected [ 1.100682] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.100708] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.100732] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.101264] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.101282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.101298] usb usb2: Product: xHCI Host Controller [ 1.101313] usb usb2: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd [ 1.101328] usb usb2: SerialNumber: 0000:01:00.0 [ 1.101921] hub 2-0:1.0: USB hub found [ 1.101990] hub 2-0:1.0: 4 ports detected [ 1.103512] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.103873] dwc_otg: FIQ enabled [ 1.103886] dwc_otg: NAK holdoff enabled [ 1.103898] dwc_otg: FIQ split-transaction FSM enabled [ 1.103913] Module dwc_common_port init [ 1.104366] usbcore: registered new interface driver uas [ 1.104468] usbcore: registered new interface driver usb-storage [ 1.104667] mousedev: PS/2 mouse device common for all mice [ 1.106551] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.109997] sdhci: Secure Digital Host Controller Interface driver [ 1.110010] sdhci: Copyright(c) Pierre Ossman [ 1.110627] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.111216] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.115013] ledtrig-cpu: registered to indicate activity on CPUs [ 1.115322] hidraw: raw HID events driver (C) Jiri Kosina [ 1.115516] usbcore: registered new interface driver usbhid [ 1.115529] usbhid: USB HID core driver [ 1.116557] vchiq: vchiq_init_state: slot_zero = (ptrval) [ 1.118346] [vc_sm_connected_init]: start [ 1.126457] [vc_sm_connected_init]: end - returning 0 [ 1.128704] Initializing XFRM netlink socket [ 1.128742] NET: Registered protocol family 17 [ 1.128852] Key type dns_resolver registered [ 1.129315] Registering SWP/SWPB emulation handler [ 1.129620] registered taskstats version 1 [ 1.129639] Loading compiled-in X.509 certificates [ 1.130185] Key type ._fscrypt registered [ 1.130199] Key type .fscrypt registered [ 1.140827] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.140912] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2 [ 1.147018] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.148000] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.148016] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.198667] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.200324] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.201982] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.205165] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.206840] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.214046] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.217000] of_cfs_init [ 1.217263] of_cfs_init: OK [ 1.218407] Waiting for root device /dev/mmcblk0p7... [ 1.254332] random: fast init done [ 1.286533] mmc1: new high speed SDIO card at address 0001 [ 1.320477] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.321383] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 1.324696] mmcblk0: p1 p2 < p5 p6 p7 > [ 1.341811] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 1.341876] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 1.347523] devtmpfs: mounted [ 1.356205] Freeing unused kernel memory: 2048K [ 1.384037] Run /sbin/init as init process [ 1.473834] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.656469] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.656489] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.656505] usb 1-1: Product: USB2.0 Hub [ 1.659018] hub 1-1:1.0: USB hub found [ 1.659283] hub 1-1:1.0: 4 ports detected [ 1.797022] systemd[1]: System time before build time, advancing clock. [ 1.887377] NET: Registered protocol family 10 [ 1.888740] Segment Routing with IPv6 [ 1.920523] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.921304] systemd[1]: Detected architecture arm. [ 1.993777] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 1.997443] systemd[1]: Set hostname to <raspberrypi>. [ 2.135343] usb 1-1.3: New USB device found, idVendor=0518, idProduct=0001, bcdDevice= 1.00 [ 2.135362] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.135379] usb 1-1.3: Product: USB-compliant keyboard [ 2.135398] usb 1-1.3: Manufacturer: Plus More Enterprise LTD. [ 2.147806] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0518:0001.0001/input/input0 [ 2.214528] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:01:00.0-1.3/input0 [ 2.222068] input: Plus More Enterprise LTD. USB-compliant keyboard Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0518:0001.0002/input/input1 [ 2.222647] input: Plus More Enterprise LTD. USB-compliant keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0518:0001.0002/input/input2 [ 2.284155] input: Plus More Enterprise LTD. USB-compliant keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0518:0001.0002/input/input3 [ 2.284482] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:01:00.0-1.3/input1 [ 2.383782] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 2.522400] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30 [ 2.522419] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.522435] usb 1-1.4: Product: USB-PS/2 Optical Mouse [ 2.522452] usb 1-1.4: Manufacturer: Logitech [ 2.533843] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C045.0003/input/input4 [ 2.534353] hid-generic 0003:046D:C045.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-1.4/input0 [ 2.710244] random: systemd: uninitialized urandom read (16 bytes read) [ 2.720760] random: systemd: uninitialized urandom read (16 bytes read) [ 2.721634] systemd[1]: Listening on Journal Socket. [ 2.722104] random: systemd: uninitialized urandom read (16 bytes read) [ 2.722567] systemd[1]: Listening on udev Kernel Socket. [ 2.730256] systemd[1]: Mounting Kernel Debug File System... [ 2.731825] systemd[1]: Listening on Journal Audit Socket. [ 2.732504] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.738563] systemd[1]: Mounting RPC Pipe File System... [ 2.740650] systemd[1]: Created slice system-getty.slice. [ 2.877740] i2c /dev entries driver [ 3.208159] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null) [ 3.321971] systemd-journald[117]: Received request to flush runtime journal from PID 1 [ 3.926544] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 3.935677] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 3.936756] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 3.937964] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 4.116381] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.121091] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.121112] [vc_sm_connected_init]: start [ 4.124223] mc: Linux media interface: v0.10 [ 4.152413] [vc_sm_connected_init]: installed successfully [ 4.173539] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.227192] videodev: Linux video capture interface: v2.00 [ 4.304660] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.306817] bcm2835_audio bcm2835_audio: card created with 4 channels [ 4.327247] bcm2835_audio bcm2835_audio: card created with 4 channels [ 4.342738] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 4.374631] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.400257] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.404599] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.404644] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.411194] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 4.412286] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.412327] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.412625] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 4.417216] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 4.431677] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 4.431708] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 4.431730] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 4.431751] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 4.431772] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 4.435633] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 4.436790] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.436834] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.625283] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.751928] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.837507] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.850827] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.851425] usbcore: registered new interface driver brcmfmac [ 4.874173] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 4.902843] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 4.949952] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 4.949974] checking generic (3e267000 960000) vs hw (0 ffffffffffffffff) [ 4.949989] fb0: switching to vc4drmfb from simple [ 4.952038] Console: switching to colour dummy device 80x30 [ 4.952268] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.952281] [drm] No driver support for vblank timestamp query. [ 4.952294] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 4.954121] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 5.052919] Console: switching to colour frame buffer device 480x135 [ 5.052976] vc4-drm gpu: fb0: vc4drmfb frame buffer device [ 5.119306] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.140835] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea [ 7.507005] uart-pl011 fe201000.serial: no DMA platform data [ 7.612783] random: crng init done [ 7.612801] random: 7 urandom warning(s) missed due to ratelimiting [ 7.627626] 8021q: 802.1Q VLAN Support v1.8 [ 8.104039] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.195768] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 8.596549] bcmgenet: Skipping UMAC reset [ 8.599061] bcmgenet fd580000.ethernet: configuring instance for external RGMII [ 8.599434] bcmgenet fd580000.ethernet eth0: Link is Down [ 10.338260] broken atomic modeset userspace detected, disabling atomic [ 11.753902] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 11.753936] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.509259] fuse: init (API version 7.31) [ 14.254106] Bluetooth: Core ver 2.22 [ 14.254168] NET: Registered protocol family 31 [ 14.254173] Bluetooth: HCI device and connection manager initialized [ 14.254187] Bluetooth: HCI socket layer initialized [ 14.254196] Bluetooth: L2CAP socket layer initialized [ 14.254211] Bluetooth: SCO socket layer initialized [ 14.265261] Bluetooth: HCI UART driver ver 2.3 [ 14.265271] Bluetooth: HCI UART protocol H4 registered [ 14.265308] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 14.265468] Bluetooth: HCI UART protocol Broadcom registered [ 14.410575] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 14.488872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.488884] Bluetooth: BNEP filters: protocol multicast [ 14.488913] Bluetooth: BNEP socket layer initialized [ 14.535726] Bluetooth: RFCOMM TTY layer initialized [ 14.535744] Bluetooth: RFCOMM socket layer initialized [ 14.535764] Bluetooth: RFCOMM ver 1.11 [ 233.980876] v3d fec00000.v3d: MMU error from client L2T (0) at 0xad21000, pte invalid root@raspberrypi:/home/pi#