User:Ben/FuntooServer UEFI LUKS RAID1

From Funtoo
< User:Ben
Revision as of 14:55, July 30, 2021 by Ben (talk | contribs)
Jump to navigation Jump to search

This is a quick write up on how I installed an encrypted Funtoo Server on my OVH Server


   Warning

You may try this installation method at your own risk! Please note: this guide is outside of the official installation documentation and cannot be supported. If you choose to use this, we assume you know what you are doing and you are on your own.

Special Thanks To:

Open TODOs

  • storage raid will currently not be decrypted and mounted automatically.

Assumptions

You will have an Ryzen or Epyc Server with:

  • 2x NVMe SSDs
  • 2+ Storage Disks
  • IPMI or remote KVM access when the server boots
  • a running Linux installation on one of the storage disks

Target Setup

NAME            MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda               8:0    0   3.6T  0 disk  
└─sda1            8:1    0   3.6T  0 part  
  └─md127         9:127  0   3.6T  0 raid1 
    └─home      254:3    0   3.6T  0 crypt /home
sdb               8:16   0   3.6T  0 disk  
└─sdb1            8:17   0   3.6T  0 part  
  └─md127         9:127  0   3.6T  0 raid1 
    └─home      254:3    0   3.6T  0 crypt /home
nvme1n1         259:0    0 894.3G  0 disk  
├─nvme1n1p1     259:1    0   512M  0 part  
└─nvme1n1p2     259:2    0 893.8G  0 part  
  └─md126         9:126  0 893.6G  0 raid1 
    └─root      254:0    0 893.6G  0 crypt 
      ├─vg-swap 254:1    0    64G  0 lvm   [SWAP]
      └─vg-root 254:2    0 829.6G  0 lvm   /
nvme0n1         259:3    0 894.3G  0 disk  
├─nvme0n1p1     259:4    0   512M  0 part  
└─nvme0n1p2     259:5    0 893.8G  0 part  
  └─md126         9:126  0 893.6G  0 raid1 
    └─root      254:0    0 893.6G  0 crypt 
      ├─vg-swap 254:1    0    64G  0 lvm   [SWAP]
      └─vg-root 254:2    0 829.6G  0 lvm   /

Getting Started

First we need to ssh into our temporary Linux system that we will use to install our FuntooServer. In my case I used the management interface from OVH to install an Ubuntu 20.04 Server on /dev/sda

After we ssh'ed into our Server we can start with preparing the funtoo boot raid.

root # gdisk /dev/nvme0n1
[...]
Command (? for help): o
This option deletes all partitions and creates a new protective MBR.
Proceed? (Y/N): y
[...]
Command (? for help): n
Partition number (1-128, default 1): 
First sector (34-167772126, default = 2048) or {+-}size{KMGTP}: 
Last sector (2048-167772126, default = 167772126) or {+-}size{KMGTP}: +512M
Current type is 8300 (Linux filesystem)
Hex code or GUID (L to show codes, Enter = 8300): EF00
[...]
Command (? for help): n
Partition number (2-128, default 2): 
First sector (34-167772126, default = 1050624) or {+-}size{KMGTP}: 
Last sector (1050624-167772126, default = 167772126) or {+-}size{KMGTP}: 
Current type is 8300 (Linux filesystem)
Hex code or GUID (L to show codes, Enter = 8300): 
[...]
Command (? for help): w
[...]
Do you want to proceed? (Y/N): Y