The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.
Install/Download LiveCD/zh-cn
安装指南:下载 LiveCD
为了安装 Funtoo Linux,首先需要使用基于 Linux 的 Live CD 或 U 盘来启动计算机。我们目前推荐使用 Gentoo 最小化安装 CD,因为它包含了现代的内核和最新的 UEFI 系统的启动,并且可以快速下载。它可以被刻录成 CD/DVD 或安装在 U 盘上。在这里下载它:
When installing Funtoo Linux on x86-64bit, we highly recommend the official Funtoo Linux LiveCD/LiveUSB, which can always be downloaded here:
While any modern bootable Linux image should be sufficient to install Funtoo Linux, the Funtoo LiveCD has several advantages over other options. Because it natively runs Funtoo Linux, and includes our official debian-sources kernel with very good hardware support, the hardware it supports is going to match the hardware that Funtoo Linux supports -- thus allowing you to identify any hardware compatibility issues immediately.
In addition, our LiveCD is regularly updated, and includes NetworkManager which allows the use of the easy nmtui
command to configure your network. It also includes our innovative Fchroot tool, which allows you to use QEMU to "chroot" into non-x86 systems such as arm-64bit and riscv-64bit. This allows the Funtoo LiveCD to be used to even rescue and set up systems with different instruction sets!
要将其复制到 U 盘上进行启动,使用以下命令:
root # dd if=install-amd64-minimal-20210103T214503Z.iso of=/dev/sdx bs=4k status=progress
当然,需要将 /dev/sdx
改为指向系统中 U 盘的块设备。
接入网络
关于从 LiveCD 设置接入网络的步骤,请参见 Funtoo:New Install Experience/LiveCD 页面。
远程安装
Alternatively, you can log into your bootable environment over the network via SSH to perform the install from another computer, and this may be more convenient way to install Funtoo Linux.
First ensure that sshd
is running. You may need to start sshd
as follows:
root # /etc/init.d/sshd start
如果要远程完成安装,方法如下。首先,需要确保可启动 CD/USB 镜像已正常连接网络。然后,需要设置一个root密码:
root # passwd New password: ******** Retype new password: ******** passwd: password updated successfully
输入密码后,现在需要确定可启动系统的 IP 地址,然后就可以使用 ssh
连接到它。要确定 LiveCD 当前使用的 IP 地址,输入 ifconfig
:
root # ifconfig
另外,还可以通过 iproute2 ip
工具确定 IP 地址:
root # ip addr show
One of the interfaces should have an IP address (listed as inet addr:
) from your LAN. You can then connect remotely, from another system on your LAN, your bootable environment, and perform steps from the comfort of an existing OS. On your remote system, type the following, replacing 1.2.3.4
with the IP address of the LiveCD. Connecting from an existing Linux or MacOS system would look something like this:
remote system $ ssh root@1.2.3.4 Password: **********
如果想从现有的微软 Windows 系统进行远程连接,则需要下载一个 Windows 的 SSH 客户端,比如 OpenSSH。
通过 SSH 登录后,现在已经远程连接到 LiveCD,可以进行安装步骤。
Install Guide, Chapter 1 | < Prev | Next > |